Product Details :
Scot WP -1 is waterbased Clear, colorless penetrating sealer for porous & non-porous natural stone. Dilute WP-1 in Ratio of 1:7 with filtered water TDS less then 200.It is applied with a conventional low pressure spray,brush or roller, in various passes wet on wet from bottom up taking care not to let the product run until saturation of the substrate is reached.Don't wait first coat to dry before applying the next coat.A full cure is achieved after 24–72 hours. Foot traffic may begin in 6–8 hours.
Information :
- Easy to apply by brush,low pressure spray or roller
- Apply coat on coat wet surface two coat as needed for porous, absorbent surfaces.
- Apply 30–40 minutes after first coating as directed in step 3.
- Remove excess sealer by wiping surface thoroughly with clean, dry white towels.
- Does not change the appearance of exterior decorative coating
- Minimizes staining, efflorescence
- Reduces capillary water absorption
- Cost Effective
- Clear coating does not stain the treated surface.
- Reduces the growth of algae and fun
